|
Your Materials Checklist
Sides, bottom and lid are made from 12mm thick tongue and groove "V" jointed
profile Pine Lining Boards, but you can also use other types of timber and
dimensions depending on your preference. Long lengths can be supplied sufficient
for you to cut the required pieces.
When ordering, be sure to say that your need
is for lengths from which at least four 890mm pieces will be cut. Or, you can
order cut-to-length pieces at extra cost, ready to assemble.
Timber
Pine Lining Boards
- 22 x 560mm long
- 4 x 890mm long
- 7 x 555mm long
- 42 x 19mm
Pine Battens
- 4 x 890mm long
- 2 x 840mm long
- 4 x 480mm long
- 4 x 460mm long
- 3 x
450mm long
Fastening Material
- Hinges - 2 x 70mm Butt or Strap type or long Piano type if preferred
- Screws -
fixing hinges Packet 30 x 2mm Bullet Head Nails.
|
