|
Before painting any concrete surface, it needs to be prepared. This not only
creates a slightly rough surface for the paint to adhere to but will also remove
grease, oil and dirt.
White Knight Concrete Etcher is very easy to use. Just follow the directions on
the pack and always wear eye protection & gloves.
Once you have mixed the etcher with water start spreading the mixture using a
stiff bristle brush to assist the process.
Leave for 20 minutes then wash off.
Remember there are water restrictions on hard surfaces so be conservative.
Simply apply Taubmans Paving paint and in 30 minutes you can be walking on your
new floor.
|
